Bluebird ELC Design Files
Revision as of 03:17, 20 November 2019 by Elcwikiadmin (talk | contribs) (→3 Phase/Single Phase TRIAC Load Switching Board)
<--Go back to Bluebird ELC contents
Contents
System Designs
| System Type | Switching Outputs | Rated Power | Control Board Revision | Schematic | System Bill of Materials | Notes |
|---|---|---|---|---|---|---|
| 3 Phase/Single Phase | 3PH2Step/SinglePH6Step | 10KW/22KW | 3.00 | Download Schematic | View Online | |
| 3 Phase | Single | 10KW | 2.50 | Download Schematic | View Online |
Control Board
| Revision | Schematic | Gerber Files | Bill of Materials | Notes |
|---|---|---|---|---|
| 3.00 | Download Schematic | Download Gerber Files | View Online or Download Spreadsheet | Now interfaces with Diablo HMI (no integrated displays) |
| 2.50 | Download Schematic | Download Gerber Files | View Online | Comparator pin error fixed, some pin definitions changed |
| 2.00 | Download Schematic | Download Gerber Files | View Online | Comparator pin error described here |
3 Phase/Single Phase TRIAC Load Switching Board
A new version of the load board is available (rev 3.00).
New Features/Changes Summary:
- No power supply required
- Can be used on the high side or the low side of the ballast. (Previously we were limited to using the TRIACs on the low side)
- Supports back-to-back SCR/Thyristor modules.
- Same input connector as the older designs.
- Output connector requires one more connection to the TRIACs than previous designs. (3 channels per load board as with previous designs).
| Revision | Schematic | Gerber Files | Bill of Materials | Notes |
|---|---|---|---|---|
| 3.00 | Download Schematic | Download Gerber Files | View Online for TRIACs or Download Spreadsheet for TRIACs View Online for Thyristor Modules or Download Spreadsheet for Thyristors | Recommended Version. Also known as Load Switching Passive Rev 1.00. |
| 2.00 | Download Schematic | Download Gerber Files | View Online or Download Spreadsheet | Trigger current for 2 TRIACs per output (6 total). Power supply for 2 load switching modules |
| 1.00 | Download Schematic | Download Gerber Files | View Online |
Bluetooth Expansion Modules
| Name | Revision | Schematic | Gerber Files | Notes |
|---|---|---|---|---|
| HC-06 Bluetooth Module | 1.00 | Download Schematic | Download Gerber Files | Recommended version. Bluetooth 4.1 instead of BTLE. Smoother UART performance. Order HC-06 Bluetooth module instead of BM71. PCBs must be made separately. |
| BM71 Bluetooth Module | 1.00 | Download Schematic | Download Gerber Files | BTLE module, not compatible with older smartphones. Data stream also not as stable. Materials included in Control Board Rev3 BOM. PCBs must be made separately. |
