Difference between revisions of "Canary Software"
Jump to navigation
Jump to search
Elcwikiadmin (talk | contribs) |
Elcwikiadmin (talk | contribs) |
||
| Line 20: | Line 20: | ||
!Download | !Download | ||
|- | |- | ||
| − | |CanaryChic||ATMEGA328P||50 Hz||49.5||46.0||1.00||Rev 1.0||[[Media:cc_rev1_328P_50hz. | + | |CanaryChic||ATMEGA328P||50 Hz||49.5||46.0||1.00||Rev 1.0||[[Media:cc_rev1_328P_50hz.elf|Download ELF]] |
|- | |- | ||
|} | |} | ||
Latest revision as of 12:03, 31 March 2019
Embedded Software
The embedded software can be loaded into the Atmel AVR micro-controller using a programmer/debugger as described in the Canary Embedded Software section. If you want to build the code from source for modification or further development details on installing Git can be found here, and a brief tutorial on using Git can be found here.
Precompiled Binaries
- Processor: The processor the software is compiled for.
- Nominal System Frequency: The frequency the electrical system should be controlled to (50/60Hz).
- Alarm Frequency: The frequency the alarm will begin to sound.
- Under-Frequency Cutoff: The frequency the ELC will disconnect the supply.
| Name | Processor | Nominal System Frequency | Alarm Frequency | Under-Frequency Cutoff | Software Version | Hardware Version | Download |
|---|---|---|---|---|---|---|---|
| CanaryChic | ATMEGA328P | 50 Hz | 49.5 | 46.0 | 1.00 | Rev 1.0 | Download ELF |
